The XSD Sand Washing Machine procedure is normally composed because of the Sand Washing Machine, loafer, rollers and push unit, brake tensioning unit, loading, unloading, cleansing as well as other products.



The typically applied are rubber belt and plastic tape. The rubber belt is suited to use while in the doing the job ecosystem of temperature -15 ~ forty ℃. Content temperature really should not exceed 50 ° C, if more than 50 ℃, please inform the manufacturers when place an order for goods so that we can choose a heat resistant Sand Washing Machine. Upward transportation granules inclination is of 12 ° ~ 24 °. For large inclination conveying, skirts band is available. Plastic belt is with anti-oil, anti-acids, anti-alkalis advantages, etc., but it has poor climatic adaptability, easy to slip and aging. Bandwidth is the main technical parameters of the belt conveyor.



There are trough roller, flat-shaped roller, self-aligning roller and buffer roller. Trough roller, composed by 3 rollers, supports bearing branch, is applied for the transfer of granular supplies; aligning roller is for adjusting the horizontal position to avoid deviation; buffer roller is mounted at the discharging position to reduce the content impact on the band.


It is divided into drive roller and bend pulley. The driving drum is the main components of your power transmission, including single drum (tape roller wrap angle is of 210 ° ~ 230 °), double drum (wrap angle of 350 °) and multi-roller (for power).



Its role is to make the Sand Washing Machine achieve the necessary tension, in order to avoid slippage from the travel rollers, and ensure the Sand Washing Machine at the deflection roller inside of a predetermined range; it contains a spiral tensioning device, hammer tensioning machine and car type tensioning gadget.